Jan 06, 2015 · 3 of 6 Carbon Steel & Low Alloy SAFETY DATA SHEET 7.2 7.3 8.1 8.2 9.1-----OSHA PEL (TWA) (mg/m³) USA ACGIH USA OSHA Silicon ACGIH TWA (mg/m³) Log Pow:No data available Appropriate engineering controls:Local exhaust and general ventilation must be adequate to meet exposure standards. Hand protection:Wear welding gloves. Exposure controls:
Carbon Steel Solid Wires for MIG/MAG ER70S-3 ER70S-6Welding Wire Carbon Steel Solid Wires for MIG/MAG ER70S-3 A deoxidized wire used for mild and low alloy steel general purpose fabrication. Good for out-of-position welding using short circuiting transfer with 75% Ar +25% CO 2 or CO 2 shielding gases. Good performance over mill scale and rust. AWS Classifi cation Size (inch) Part No.
All Midalloy mild and low alloy bare wires are free of copper coating to minimize adverse contamination of the weld metal for x-ray quality welds and lower toxic fumes during the welding process. Many Midalloy low alloy copper free wires offer low residuals with x-factors < 15 and J-factors under 130.
ER70S-6 (GTAW) TIG The Harris Products GroupER70S-6 (GTAW) TIG. Description:Mild Steel Welding Alloy. A general purpose welding wire for fabrication of mild steel. Contains more deoxidizers than ER70S-3. The additional deoxidizers also provide better wetting, giving a flatter bead shape and the capabilityof faster travel speeds. Conforms to AWS A5.18 ER70S-6
ER70S-6 - Weld WireWeld WireType ER70S-6 is a wire with higher levels of Deoxidizers welding of steels with moderate amounts of scale or rust. (Mn & Si) compared to other carbon steel wires. This wire is suitable for welding of steels with moderate amounts of scale or rust. For Mig welding use Carbon Dioxide or Argon + Co2 or Argon + 2% Oxygen as shielding gases.
Oxford Alloys Copper Coated Solid Er70s-6 Mild And Low The Oxford Alloy ER70S-6 has been designed to provide X-ray quality porosity-free welds and the highest tensile strength (as welded) of the plain carbon steel wires 100 - 290 in./min. wire feed speed 20 ft-lb at -20 deg F impact strength
SÜA - ER70S-6 TIG Welding Rod - Mild & Low Alloy Steel SÜA ER70S-6 is the most common of the copper-coated mild steel GMAW (MIG) wires for single or multiple pass welding. Common uses include construction work, farm implement fabrications, general shop applications with poor fit-up or rusty, oily plates, tanks, steel castings or forgings.
Sep 22, 2020 · ER70S-6 is popularly called a Filler Metal due to its higher level of Silicon hence the more fluid. This results in the ability to float oxides to the surface during the welding process. It mainly used Argon and Carbon II oxide as shielding gases with amounts of 75 and 25 respectively.