SS400 Steel

study on the microstructure mechanical properties and

study on the microstructure mechanical properties and

study on the microstructure mechanical properties and

A comprehensive study on the microstructure and mechanical

Feb 18, 2020 · Many attempts have been made to analyse the microstructure of API X70 steel welded joints. However, there is a lack of a more systematic metallographic investigations comprising the base material, HAZ as well as weld metal with relation to mechanical properties [10,11,12,13,14,15,16,17,18,19,20].Ghomashchi and co-workers [] revealed that the microstructure A comprehensive study on the microstructure and mechanical Feb 18, 2020 · Many attempts have been made to analyse the microstructure of API X70 steel welded joints. However, there is a lack of a more systematic metallographic investigations comprising the base material, HAZ as well as weld metal with relation to mechanical properties [10,11,12,13,14,15,16,17,18,19,20].Ghomashchi and co-workers [] revealed that the microstructure

Comparative experimental and numerical study on the

May 22, 2020 · Experimental and numerical analysis of formability behavior for two types of steel sheets, namely E335D and DP600, was conducted. The former is a high strength low alloy (HSLA) steel, while the latter is an advanced high strength steel (AHSS). Initially, mechanical tests including uniaxial tensile test and the Erichsen cupping test were performed. Tensile test revealed that AHSS steel had Influence of curing temperature on the mechanical Aug 26, 2020 · This study investigates the influence of different percentages:10, 30, and 50% of limestone powder (LS) and different curing temperatures:50, 20, and 5°C on mechanical properties and microstructure of mass concrete. The microstructure is studied by Xray diffraction, thermogravimetric, and scanning electron microscopy. Mechanical properties and microstructure of potato pears, potatoes and so on, the study on the mechanical properties mainly focused on the compres-sion, impact and other aspects of the test upon the whole fruitage.[2124] At present, the research on potato mainly focused on mechanical damage of pulp tissue or the effect of

Microstructure, mechanical properties and wear behavior

This paper deals with the production of Deep Cryogenically Chilled (DCC) ASTM A216 WCB steel (plane carbon group) having 0.5% chromium, subject to different chilling rates to study the effect of chilling on microstructure and mechanical properties. In this investigation, metallic, nonmetallic and subzero chills (one each) were used. The specimens taken from casting were tested for their Study of Mechanical Properties and Microstructure of Jan 31, 2017 · Pujar A.M., Kulkarni C. (2017) Study of Mechanical Properties and Microstructure of Aluminium Alloy Reinforced with TiB 2, by in Situ Technique. In:Mohan B. R., Srinikethan G., Meikap B. (eds) Materials, Energy and Environment Engineering. Study of Microstructure and Mechanical Properties of microstructure of the fusion zone and the heat affected zone was greatly influenced by rapid grain growth that results in poor ductility and low impact toughness of the weldment. The second section describes the mechanical properties evaluation and correlation with microstructure. It

Study of Microstructure, Texture and Mechanical Properties

The properties, texture and microstructure of the annealed Ta-7.5%W (mass fraction) alloy foils were investigated by the analysis of mechanical properties testing, X-ray, and EBSD. Study of Size Effect on Microstructure and Mechanical microstructure, geometrical imperfection, and mechanical properties of strut has rarely been studied. The aim of this study was to investigate the inuence of size effect on the microstructure, geometrical imperfection, and mechanical properties of SLM-fabricated AlSi10Mg lattice struts, Study of Size Effect on Microstructure and Mechanical microstructure, geometrical imperfection, and mechanical properties of strut has rarely been studied. The aim of this study was to investigate the inuence of size effect on the microstructure, geometrical imperfection, and mechanical properties of SLM-fabricated AlSi10Mg lattice struts,

Study of the Microstructure and Mechanical Properties

A new Laser Boost strategy with a larger melting area and a productivity of 43.20 cm3/h has been compared to a Linear Classic strategy. Ti-64 alloy samples were elaborated with both strategies to study their influence on microstructure and mechanical properties. Study on the Microstructure and Mechanical Properties of The microstructures and mechanical properties of 17-4 PH stainless steel at each steps of heat treatment, such as homogenizing, solid solution treatment followed by aging treatment, longterm aging at 400 °C, and recovery treatment, in order to obtain a better understanding of the embrittlement phenomena on aging, was investigated. As the homogenizing treatment time increased, the length of Study on the Microstructure and Mechanical Properties of The7A05 aluminum alloy of the 10mm thickness was welded by the friction stir welding. The microstructure and mechanical Properties of the welded joint was researched by the optical microscope, etc. The results showed:the microstructure of the weld nugget zone and the thermal mechanically affected zone were refined as the welding speed increasing when the rotate speed is

Study of the microstructure and mechanical properties of

The present study examined the microstructure and mechanical properties of ceramic composites based on a kaolin from Djebel Debbagh, northeast Algeria, composed mainly of kaolinite and halloysite with the addition of various amounts of BaCO 3. The composites were prepared by high-energy ball milling and sintered at 1100°C and 1200°C for 3 h.

Contact us

Email: [email protected]